How to fix a chipped laminate floor?

Detailed procedure

How to repair chips on a laminate floor: step by step

1. 

   1

   Step 1

   Preparing the Area

   • Gently remove any dirt, dust, or debris from the damaged area of your laminate floor to create a clean surface for the repair.
   • Clean the surrounding area thoroughly to eliminate any remaining particles or residue that could interfere with adhesion.
   • Use a damp cloth to wipe the area, ensuring it is completely free of dust and oils, then let it air dry fully before starting the repair process.

2. 

   2

   Step 2

   Applying the Wood Putty

   • For chips larger than 1/4 inch or 0.6 cm, use the wood filler epoxy putty to fill the damaged area.
   • Cut off a small portion of the epoxy putty and knead it thoroughly until the color is uniform.
   • Apply the filler to the chips immediately after kneading to ensure proper adhesion.
   • Smooth out any excess filler to avoid bulges and press it firmly into the damaged area.
   • Allow the filler to cure as per the instructions until it hardens and becomes stable.

3. 

   3

   Step 3

   Mixing and Matching the Color

   • Consult the Color Mixing Guide included in your kit to create the ideal shade for your laminate floor.
   • Use the provided empty mixing jar to combine the colors as per the guide.
   • Mix the colors thoroughly to achieve a smooth and consistent tone.
   • Ensure the color matches perfectly before applying it to your laminate floor for a seamless repair.

4. 

   4

   Step 4

   Applying the Repair Compound

   • Evenly apply the repair compound to the damaged area of your laminate floor, starting from the edges of the chips and working inward to avoid air bubbles.
   • Use the spatula for larger chips to ensure a smooth application.
   • For detailed touch-ups or smaller areas, use the brush for precise and controlled application.

5. 

   5

   Step 5

   Smoothing the Surface

   • Smooth the surface of your laminate floor using gentle, even strokes to create a seamless and level finish that blends naturally with the surrounding area.
   • Quickly remove any excess compound from the undamaged portions of your laminate floor using a clean paper towel, ensuring no residue is left behind.

6. 

   6

   Step 6

   Drying and Additional Layers

   • Allow the repair compound on your laminate floor to dry completely for several hours, ensuring it is no longer sticky to the touch.
   • If needed, apply additional layers to build up the chips until it is flush with the surrounding surface.
   • Ensure each layer dries fully before applying the next to achieve the best and most durable results.

7. 

   7

   Step 7

   Adding Texture

   • If your laminate floor has grain patterns, designs, or textures, use the small brush to carefully replicate them for a realistic and natural finish.
   • Use darker shades like Walnut, Mahogany, or Black to recreate the original grain patterns, ensuring the repaired area blends seamlessly with the surrounding surface.

8. 

   8

   Step 8

   Finishing Touches

   • Inspect the repaired area on your laminate floor after the epoxy putty and surface compound have fully cured.
   • If the material and original finish can safely accept light sanding, use fine-grit sandpaper with gentle, controlled pressure only where leveling is needed.
   • Do not sand a laminate wear layer, delicate veneer or thin factory finish. Level the filler during application and remove excess compound before it dries instead.
   • Stop before the surrounding color, pattern, grain or finish is affected.