How to fix a cracked granite countertop?

Detailed procedure

How to repair cracks on a granite countertop: step by step

1. 

   1

   Step 1

   Clean and Prepare the Crack

   • Carefully remove loose tile or stone fragments and dust without enlarging the crack.
   • Wipe the crack and surrounding surface with a damp cloth, then let it dry thoroughly before applying repair material.

2. 

   2

   Step 2

   Knead Putty for Deep Crack Sections

   • Use the epoxy tile putty where the crack is deeper or wider than 1/4 inch (0.6 cm); use color compound alone for shallow surface damage.
   • Knead the putty until its color is uniform and apply it within two minutes.

3. 

   3

   Step 3

   Fill and Shape the Crack

   • Press the putty firmly into deep sections so no air bubbles remain, keeping the surrounding tile or stone face clean.
   • Smooth and shape the putty before it hardens; after one hour it can be sanded only where the surface finish is compatible with sanding.

4. 

   4

   Step 4

   Mix the Matching Tile or Stone Color

   • Use the color mixing guide and reusable jar to build the closest base color for the surrounding tile or stone.
   • Test a small amount and let it dry fully before making small color adjustments; add tiny amounts of white or black to change the tint or shade.

5. 

   5

   Step 5

   Apply Color Compound Along the Crack

   • Apply the matching repair compound beneath and along the visible edges of the crack, then work toward the center.
   • Use the spatula along broader sections and the applicator brush for narrow lines and detailed areas.

6. 

   6

   Step 6

   Level the Repair at the Surface

   • Smooth the filled crack so it follows the original surface plane and remove excess compound from the intact surrounding finish.
   • Wipe away excess with a paper towel or damp cloth before the compound dries.

7. 

   7

   Step 7

   Restore the Pattern and Let It Dry

   • Recreate nearby veining, pattern, or texture with the fine brush and matching colors where needed.
   • Let the repair compound dry for several hours until it is no longer sticky; add thin layers only after the preceding layer is ready.