Repair guide

How to repair a chipped shower tile?

A chip, missing glaze or small impact divot in a firmly installed ceramic or porcelain shower tile can be rebuilt and color-matched without immediately removing the tile. The Coconix Tile & Stone Repair Kit combines epoxy tile putty for missing depth with ten mixable color compounds for the visible surface.

Because shower tile is exposed to water, first correct any loose tile, active moisture, failed grout or caulk, or waterproofing problem. Then clean and dry the chip, rebuild the missing area where needed, match the tile color and pattern, level the surface and let every layer harden before water exposure.

Chipped mustard-yellow shower wall tile beside a brass squeegee with a matching purple magnified close-up

Repair at a glance: chips on a shower tile

Material
ceramic or porcelain shower tile
Damage
chips
Item
shower tile

Repair cost

How much does it cost to repair chips on a shower tile?

Professional repair estimates by currency

USD

United States dollar

  • Smaller repair$50–$400

EUR

Euro

  • Smaller repair€75–€150

GBP

British pound

  • Smaller repair£75–£150

What does professional repair cost?

A DIY chipped shower tile repair uses one Coconix Tile & Stone Repair Kit, currently $19.95 in the US store. Professional pricing varies with chip depth, tile material, access, color and glaze matching, and whether grout, caulk, waterproofing or hidden moisture also needs attention. Published 2026 guidance places a professional chipped-tile repair at $50–$400 in the US and £75–£150 in the UK; current Dutch pricing places an individual professional tile repair or replacement at about €75–€150. Shower retiling, substrate repair and waterproofing work are separate.

What does a DIY repair cost?

$19.95

The kit price shown here is live. One kit can often cover more than one small repair.

See the repair kit

What changes the repair cost?

  • The size, depth and severity of the damage
  • The material and whether reinforcement is needed
  • The color, grain, texture and finish-matching work
  • Local labor rates and whether the item must be transported

Professional prices are indicative ranges from the approved article content and can vary by repairer, location and condition. Request a local quote for an exact comparison.

Difficulty

How difficult is it to repair chips on a shower tile?

Moderate. Rebuilding the missing depth is straightforward with epoxy tile putty; the precision comes from matching the shower tile’s base color, recreating any speckles or veining, leveling the repair and blending its matte, satin or glossy finish.

Time required

How long does it take to repair chips on a shower tile?

Plan about 30–45 minutes for cleaning, kneading, shaping, color matching and detailing, plus several hours for the epoxy tile putty and color layers to harden before showering, cleaning or direct water exposure.

When chips on a shower tile can be repaired at home

Use this repair for a chip, missing corner, small hole or shallow-to-deep void in a firmly installed ceramic or porcelain shower wall or floor tile. The kit’s epoxy tile putty rebuilds missing depth before the mixable color compound restores the visible tile color, pattern and surface profile.

When to call a professional for chips on a shower tile

Correct any loose or moving tile, active leak or moisture, failed grout or flexible caulk, failed waterproofing, or continuing wall or floor movement before making the visible repair. Once the wet-area base is stable and dry, the chipped tile can be rebuilt and color-matched with the kit.

Prepare before you start

Materials needed to repair chips on a shower tile

  • Coconix Tile & Stone Repair Kit box on the Coconix product-family background

    Coconix Tile & Stone Repair Kit

  • Cleaning Cloth

    Cleaning Cloth

  • Sanding Paper (optional)

    Sanding Paper (optional)

Before repairing chips on a shower tile

Remove soap film, limescale, body oils and loose ceramic or porcelain fragments with a shower-surface-compatible cleaner, then let the chip dry completely. Protect nearby grout, caulk and metal fittings, remove only material that is already loose without widening the damage, and compare the color mixture in the shower’s normal lighting before kneading the epoxy tile putty.

Watch how to repair chips on a shower tile

The written procedure below covers the repair steps shown in the video.

Detailed procedure

How to repair chips on a shower tile: step by step

  1. Cleaning and preparing a chipped or holed tile or stone surface for repair

    Step 1

    Clean and Prepare the Chip or Hole

    • Remove loose fragments, dust, and debris from the damaged recess while preserving sound surrounding edges.
    • Wipe the chip or hole with a damp cloth and let the area dry thoroughly before filling it.
  2. Kneading epoxy tile putty to rebuild a chip or hole

    Step 2

    Knead Putty for the Missing Depth

    • Use the epoxy tile putty for a chip or hole deeper than 1/4 inch (0.6 cm); for shallow surface loss, the repair compound can be applied without putty.
    • Knead the putty until its color is uniform and apply it within two minutes.
  3. Rebuilding a tile or stone chip, hole, or damaged edge with epoxy putty

    Step 3

    Rebuild the Chip, Hole, or Edge

    • Press the putty firmly into the recess so no air bubbles remain and the missing depth is supported.
    • Shape the putty to the original face, corner, or edge before it hardens, leaving room for the thin color-compound finish.
  4. Mixing a matching surface color for a tile or stone chip or hole repair

    Step 4

    Mix the Matching Surface Color

    • Use the color guide and mixing jar to reproduce the base color of the surrounding tile or stone.
    • Test the mixture on a small area and let it dry fully before refining the tint, shade, or secondary colors.
  5. Covering a rebuilt tile or stone chip or hole with matching color compound

    Step 5

    Cover the Rebuilt Area with Color Compound

    • Apply the repair compound beneath and along the remaining edges first, then work inward over the rebuilt area.
    • Use the spatula for the main face and the brush for corners, narrow edges, and detailed touch-ups.
  6. Shaping and leveling a repaired tile or stone chip or hole

    Step 6

    Shape the Original Surface and Remove Excess

    • Level the repair to the original surface or edge profile while the compound remains workable.
    • Remove excess from the intact surrounding finish with a paper towel or damp cloth before it dries.
  7. Adding pattern detail and finishing a tile or stone chip or hole repair

    Step 7

    Add Veining or Texture and Let It Dry

    • Use the fine brush and matching secondary colors to continue nearby veining, pattern, or texture across the repair.
    • Allow several hours for the compound to dry until it is no longer sticky, then add another thin layer only if the repair still sits low.
Open the official detailed instruction manualProduct-specific Coconix application guidance

Protect the result

How to care for a shower tile after repairing chips

  • Let the repair compound dry for several hours until it is no longer sticky before normal cleaning or use.
  • Use gentle, surface-compatible cleaners and avoid direct impact on a rebuilt edge.
  • If the repair settles below the surrounding surface, add another thin matched layer after the previous layer is ready.

Aftercare

Keep the repaired shower tile dry and untouched until the epoxy tile putty and every color-compound layer are fully hard and no longer tacky. Resume showering and cleaning only after the repair has hardened, use a nonabrasive tile-compatible cleaner, and maintain surrounding grout and flexible caulk joints.

Amazing Product. Great customer service.

Customer repair story

Amazing Product. Great customer service.

We found this product through a Google search once a hole developed in our slate. It came quickly, with well written instructions and good quality product. As you can see from the photo, we were able to match the color of our slate nearly perfectly. And,the company has reached out to make sure we don’t have questions. Personal service for a great product.

Individual repair results vary with the damage, material, preparation and application.

Recommended for this method

Best Coconix kit to repair chips on a shower tile

amazonShop Coconix on Amazon

More repair possibilities

Explore other Coconix repair solutions

More Tile & Stone Repair Guides

Typing Repair
Tired of Throwing Things Away?

Join the Coconix Repair Hub – It’s Free!

  • Learn how to save money, rescue your favorite items, and transform old into new.
  • Get expert tips, step-by-step tutorials, and creative repair ideas delivered to your inbox.
Turn problems into possibilities—join us today!